Pile body internal force monitoring system
Contact Info
- Add:Optics Valley Core Center, Zip:
- Contact: 张静
- Tel:18062006340
- Email:18062006340@163.com
Other Products
Wuhan Zhongdi Hengda - Pile Body Internal Force Monitoring System
System Introduction
The pile body internal force monitoring system is mainly used for real-time automated monitoring of the internal force of anti-slide piles, and is applicable to fields such as foundation pits, national land geological disasters, mine geological disasters, and water conservancy and hydropower monitoring. The monitoring system adopts an integrated design, integrating sensors, data acquisition, data transmission, solar power supply, pole brackets and other components required for pile body internal force monitoring, making field installation and operation simple and convenient.
Technical Parameters
Sensor | Rebar meter | Earth pressure gauge |
Measuring Range | -200MPa~300MPa | 0~3.0MPa (range can be selected) |
Resolution | 0.025%F·S | 0.025%F·S |
Measurement Accuracy | 0.1%F·S | 0.1%F·S |
Temperature Measurement Range | -40℃~80℃ | -40℃~80℃ |
Temperature Measurement Accuracy | ±0.5℃ | ±0.5℃ |
Hydrostatic Pressure Resistance | ≥1.0MPa | 1.2 times of the measuring range |
Power Supply Mode | Solar energy, storage battery, mains electricity | |
3. Monitoring System Configuration
Serial Number | Name | Description |
1 | Sensor | Rebar meter, earth pressure gauge |
2 | Vibrating Wire Signal Collector | Used for data acquisition and storage |
3 | GPRS Antenna | Used for data transmission |
4 | Solar Panel | 100W (can be adjusted according to actual conditions, or can be replaced with mains power supply) |
5 | Storage Battery | 65Ah maintenance-free battery (can be adjusted according to actual conditions) |
6 | Charge Controller | Protect the storage battery and prevent overcharging; 12V/24V 20A |
7 | Chassis | Built-in equipment and plays a protective role |
8 | Integrated Installation Bracket | Stainless steel galvanized steel pipe, 2 meters (can be adjusted according to actual conditions) |
9 | Cloud Platform | Data display, export, and early warning |
4. Functional Features
1) Supports sending data in different protocol formats to 3 or more addresses;
2) Auto-recovery after disconnection, automatically re-sending unsuccessfully sent data after network recovery;
3) Optional synchronous monitoring of storage battery/solar voltage, charge and discharge information, temperature and humidity, signal strength, location information, etc.;
4) Supports multiple working modes: sleep mode, online mode, early warning mode;
5) Has a threshold trigger function, which immediately reports monitoring data automatically when it exceeds the threshold;
6) Can store data for more than 2 years, with the function of automatically overwriting old data;
7) Remote control, online upgrade of hardware programs;
8) By installing multiple rebar stress meters or embedded strain gauges inside the slope anti-slide pile (retaining wall, lattice beam), the monitoring system can be used to automatically measure the internal force of the structure for a long time;
9) By installing multiple earth pressure gauges on the facing surface of the slope anti-slide pile (retaining wall), the monitoring system can be used to automatically measure the lateral earth pressure of the structure for a long time;
10) The equipment has strong corrosion resistance and rust prevention ability, and factors such as temperature, freeze-thaw, rain, dust, and strong wind do not affect the normal operation of the equipment system.
| Industry Category | Consumer Electronics/Parts & Accessories/Accessories & Parts |
|---|---|
| Product Category | |
| Brand: | 中地恒达 |
| Spec: | ZDHD-（Guard-YNL） |
| Manufacturer: | 武汉中地恒达科技有限公司 |
| Origin: | 114201 |
